Sunday, 23 April 2017 13:21

New Product! Injector Adapters

Written by
Rate this item
(7 votes)

I have added injector adapters to my product list!  These can be used for adapting phase 2 side feed injectors (like the '04+ STi yellows) to a phase 1 injector rail (like the stock EJ20G or EJ22T rails).   These adapters or a fuel rail swap is required to run my 550 tune.  My kit includes all hardware required for installation.  IMPORTANT NOTE - The small O-rings are sized specifically to my adapters, you must use the ones included in the kit.  The other two larger O-rings are standard sized.

 

 

When I first swapped injectors to work on my 550 tune, I opted to swapping rails.  The EJ25D rails will fit in place of the stock EJ20G/EJ22T rails and accept phase2 injectors straight away.  They can be found relatively cheaply from a junkyard, but are slightly more painful to install.  At some point, I needed to swap back to the stock gray injectors for work on the 440 tune and decided to go back to the stock rails and use Carl Davey's adapters.   After that,  for ease of install and only a small cost difference, I have recommended using Carl Davey's adapter for years.  Carl decided to fold up shop and that left only DeatschWerks kits (at a bit more of a premium) as a viable alternative.  There was a shop in the UK that got the rights to resell Carl's kits and I had worked with them with the hope of providing a US resale channel.  After a trial of about 5 kits, the communication broke down and I was unable to source any more to resell.  I finally took it upon myself to make up my own adapters and enlisted my ME friend to help CAD up the design.  After a few 3d printed prototypes I found an online machine shop that could produce in medium quantity at a good price.  Due to the inherent danger of working with the fuel system, installation should only be done by a qualified mechanic.     

Enjoy!

Read 9609 times Last modified on Sunday, 23 April 2017 22:31
Rob

More in this category: « Back in stock 2020 update »

Categories

© 2021 RobTune LLC. All Rights Reserved.